The new TELESTEPS Telescopic Loft Ladder is probably the world's most compact solution to a very common problem, (Check the detailed information link below).

60324 version - 2.35m max floor to ceiling fits into a minimum 520mm 600mm hatch.

60927 version - 2.65m to 2.93m max floor to ceiling, fits a minimum 520mm x 920mm/1100mm minimum hatch

60924 version - 2.35m to 2.65m max floor to ceiling, fits a minimum 520mm x 890mm/1070mm minimum hatch

Or Call 01271 858698	Click to enlarge	Click to enlarge	Detailed Information

NEW - Universal - magnetic catch & operating pole, fits any swing down trapdoor and enables easy access.

IMPORTANT All dimensions given above are for a standard floor to ceiling with 4" thick joists above in a non trussed roof - If your joists are greater in size, if your floor has been raised, or if you have a trussed roof, please call for advice, before ordering. (Manufacturers specification and ours are different - OURS APPLY.

The price of the magnetic pole and catch shown, is only when bought with the ladder. If purchased separate, a £5.00 plus vat charge would apply.

Please note the springs for these ladders are fitted whilst ladder is in the horizontal position NOT while in the packed up vertical.

The Extender Set will allow an extra 100mm on the length of the ladder, (60324 only) you will need to add 100mm to the hatch length if fitting extenders.

Model 60324 is currently out of stock and will not be available until the week starting the 22 March 2010 so any orders placed will be put onto back order pending arrival.

The Loft Ladder, comes fully assembled ready to fit openings 600mm long x 500mm wide or greater . The unit is fitted to the inside of the hatch by means of a wooden plate 450mm x 200mm, (see image below).

For floor to ceiling heights up to 2.73m, select the 10 tread, for floor to ceiling heights up to 3.00m select the the 11 tread. Heights are floor to ceiling plus 30mm. You should allow for a maximum vertical clearance of 500mm from ceiling below to highest point of ladder above.

Their sprung controlled operation, keeps concertina ladders horizontal in hatch when not in use. They are brought to vertical with the hook, which is supplied, then extended to the floor and adjusted to suit your own position.

Strong construction, with wide treads (80mm x 350mm). These loft ladders come with hinges, door catch and pole hook (pole not supplied). Installation instructions supplied.

Suitable for duty weights up to (100kgs AS AT 13/03/07 tested to 200Kgs) (for use with existing hatches).

Model Type DSC

Aluminum concertina loft ladder with timber lining, trapdoor and optional top operating facility.

To order this product please call 01271 858698

Vertical doors & access ladders S11/V, P11/V

Retractable access through vertical doors has often frustrated even the most enterprising architect. Inspirational solutions from Loft Centre Products have now changed all this, giving benifits to offices, churches, village halls & schools, etc. (S11v is Die Cast Aluminium the P11v Zinc Plated steel)

To order this product please call 01271 858698

This loft ladder is available from stock in one of four standard sizes. It is constructed from pressure die-cast aluminium and supplied without the trap and lining.

This ladder is perfect for installations where a lined ceiling aperture already exists, but it is also suitable for installation onto mezzanine floors and can also be mounted onto vertical walls to give access for service maintenance.

The ladder are supplied as a ready to fit unit fixed to a 600 x 200mm laminated wood mounting board, which can simply be screwed to an appropriate surface in the location required.

Counterbalance springs mounted on the hinge brackets plus control springs in the side arms ensure that the stairway operates smoothly and safely with the minimum of effort.

The ladder can also be fitted with a telescopic handrail , it is possible to have the handrail on the left or indeed on both sides.

If you wish to mount the ladder in a vertical opening Click here we can supply an  auxiliary hinge ,which allows the ladder to store in the vertical position.

Full details of the four sizes of Junior available as standard can be found below

(The going on this ladder from loft floor to floor is set at twenty two and a half degrees, so suffient space must be allowed for this as it does not drop vertical.) (tread depth 140mm width 350mm)

CMB01 - Ceiling height up to 2.5m - MINIMUM opening 75cm x 60cm
CMB02 - Ceiling height 2.5 - 2.79m
CMB03 - Ceiling height 2.79 - 3.09m
CMB04 - Ceiling height 3.09 -3.39m

If you are using this ladder in the vertical application, with the hinge mechanism, you need to measure floor to finished floor level before making your choice.

Or Call 01271 858698	Click to enlarge

Concertina Ladder Model 'S11'

Die Cast auminium ladder with telescopic handrail.

Options Available include: Top opening facility, additional telescopic handrail, electrical operation

To Order this Item call 01271 858698

The P11 Concertina Ladder

The P11 zinc plated concertina ladder with grab handles fitted to the upper treads.

All Models feature primed steel lining frames with a complete counterbalance mechanism. The ladder stores completely within the lining frame.

Call 01271 858698 to order this item.