The Loft Ladders Vertical Hatch Concertina come in four standard sizes and are constructed from pressure die-cast aluminium, the ladder unit is supplied without the wall trap and lining.

These ladders are perfect for installations where a lined wall aperture already exists but it is also suitable for installation onto mezzanine floors and some ladders can also be mounted onto walls to give access for service maintenance. They are supplied as a ready to fit unit fixed to a 600 x 200mm laminated wood mounting board, which is screwed to a hinge mechanism.

Counterbalance springs mounted on the hinge brackets plus control springs in the side arms ensure that the stairway operates smoothly and safely with the minimum of effort. They can also be fitted with a telescopic handrail , it is possible to have the handrail on the left or indeed on both sides.

Full details of the four sizes available can be found below.

(The going from floor to floor is set at twenty two and a half degrees, so suffient space must be allowed for this as it does not drop vertically.)

CMB01v - Floor height up to 2.64m - Min apperture 600 x 770 - 09 tread 350mm wide

CMB02v - Floor height up to 2.93m - Min apperture 600 x 820 - 10 tread 350mm wide

CMB03v - Floor height up to 3.23m - Min apperture 600 x 900 - 11 tread 350mm wide

CMB04v - Floor height up to 3.53m - Min apperture 600 x 970 - 12 tread 300mm wide

When using this unit with the hinge mechanism, you need to measure floor to finished floor level before making your choice. If in doubt please call. Special Sizes can be made to order, please call for details

 The VCL/Aluminium carriage ladder is ideally suited where a sturdy means of access is required to areas only accessible through a vertical door, upward opening ceiling hatch or onto a platform / mezzanine floor.

• Two handrails as standard
• High strength extruded aluminium construction
• Special tracked carriage mounted on nylon rollers enables unit to roll quietly clear of edge
• Spring counterbalanced for easy action
• Approx. 400mm wide ladder with deep non slip treads
• Requires 2.25m storage space from edge of opening and height of 1.12m

For Fitting Instructions for The Standard Model Click here

• Recommended minimum opening size of vertical aperture 900mm(h) x 600mm(w)
• 2 section quality pine ladder
• Special tracked carriage mounted on nylon rollers enables unit to roll quietly clear of edge
• Spring counterbalanced for easy action
• Approx. ladder width 360mm, tread width 315mm and tread depth of 75mm
• Requires 2200mm storage space from edge of opening and height of 1130mm

For Fitting Instructions for The Timber Model Click here

When a light weight access ladder is required for your vertical door or mezzanine, look no further than the Mini Vertical Carriage Ladder (MVCL). The three section sliding aluminium loft ladder and radius armed operation, married with our tried and tested vertical ladder running board, ensure that the MVCL is a simple and reliable option. Unit is supplied complete with handrail to one side, operating pole and suits existing hatches from 750mm(h) x 500mm(w), maximum floor to floor 2925mm.

Vertical doors & access ladders S11/V, P11/V

Retractable access through vertical doors has often frustrated even the most enterprising architect. Inspirational solutions from Loft Centre Products have now changed all this, giving benifits to offices, churches, village halls & schools, etc. (S11v is Die Cast Aluminium the P11v Zinc Plated steel)

10 - 12 weeks for delivery

To order this product please call 01271 858698

Precision engineering with effortless operation and economical storage, the DSCV offers reliable and robust access to vertical openings. Be it for commercial or domestic use, the DSCV‘s die cast aluminium construction ensures the user has a secure and steady ascent. Eeach tread is duty rated to 200kg with a tread depth 14cm.

The DSCV has the further advantage of stowing away within the hatch and lining frame supplied, and with its counterbalanced mechanism the DSCV offers a simple, strong and effective solution

Due to the variations of this product, you will need to discuss your individual requirements with us before proceeding. We will then be able to provide you with a price and specification that exactly suits your situation.

2 - 3 weeks for delivery

Call 01271 858698