Fire Rated Loft Hatch (1hr) (Reference #Door/2 )
The fire rated version of the Classic Panel provides protected openings in ceilings and walls for access to building engineering services. Available fire rated for up to 2 hours, the door is finished in powder coated white and can be overpainted to blend with the surrounding surface. The larger panels have full length piano hinges with the smaller panels using the unique pivot pin plate hinges. The fire rated Classic Panel is a high quality robust solution suitable for everyday use with all the discrete advantages your client demands of an access panel. |
|
|
There are two frame options for the Classic Panel. A beaded Frame Type (Code CLSBF) with a perforated flange to key into the surrounding membrane, used where the surface has yet to be finished. Or the Picture Frame Type (Code CLPF) where the solid flange sits on the surface of the wall or ceiling and covers the cut edge of the aperture, used where the surface has already been finished.
The fire rating does not affect the appearance of the panel and the unique design enables panels to be fire rated without using heavyweight layers of plasterboard which effect performance. This enables the fire rated Classic Panel to be easier to use in ceilings where heavier panels can be dangerous to operate.
|
|
The Loft Hatch meets building regulations for insulated and fire rated loft hatches, it complies with Building Regulation Document L1 & L2 2002 and the robust document.
Standard Sizes 530 x 745 mm 530 x 630 mm 300 x 300 mm 450 x 450 mm 550 x 550 mm 600 x 600 mm 900 x 600 mm 1200 x 600 mm 900 x 900 mm 1200 x 1200 mm (Double Door) 1800 x 600 mm 1800 x 1200 mm (Double Door)
- Door tray & frame – Formed from 1.0mm and 1.2mm Zintec electro-galvanised mild steel 25 mm wide picture frame finished in polyester powder coat lightly textured white RAL 9010 20% Gloss
- Hinge & Lock mechanism – Factory fitted removable pivot plates with inserted steel pins located into holes in the frame. Budget or Euro-profile lock case bolted onto the return fold of the door tray with tongue locating into a slot in the frame. Lock access hole covered with white plastic collar and plug or patented ‘Touchflap’.
- Draughtstrip – Black expanded polyurethane draughtstrip 3 x 10mm to four sides.
- Insulation – Rigid fire resistant insulation block CFC & HCFC Free. U-Value - 0.35. Fire Certification - Panels tested by Chiltern International Fire (TRADA) Ltd. Test number Chilt/IF02059 20th May 2002. The panel comes finished in a polyester powder coated white textured finish which can be overpainted to match the surrounding ceiling if required. The door tray is supported along its short length by two removable pivot plates and locked by a concealed key operated budget lock. The panel is fully factory draught stripped and insulated.
If you wish to order, please fax a purchase order to 01271 858698, giving
Full invoice and delivery instructions. We will fax back a proforma invoice and banking details.
Mike Doyle
Sales & Marketing
